Adding molding to walls is one of the quickest and most inexpensive ways to add architectural detail to your home. There are many ways to add trim details for your walls. From chair rails to picture frame moulding, to traditional and modern-looking chair rails, you have plenty of options.
No matter if you're installing wall trim to enhance the look of a room or add character, there are some things you need to do. These tips will help you install the most effective molding in the least amount of time, so get ready to have your walls looking beautiful!
1. Plaster Over Drywall
It may be worth spending the money and time to replace plastered walls with drywall. You can give your walls a modern, clean look that lasts longer than plaster and also allow you to add new wiring or insulation.
2. Crown Molding with a Design
It is important that you align all pieces of the molding design if it has one. Start in the quietest corner of your home and work your manner around until the final piece in your design meets the first.
3. For a tight fit, use Construction Adhesive
Once you've finished hanging the crown molding, use a small bead of construction adhesive on the back of each piece. Depending on how secure you desire the piece to be, nail it in the wall.
4. Use a Stop block setup for your miter joints
It is important to ensure that the miter joints of all wall frames are equal in length. You can achieve this by using a stopblock set up, which holds the miter junction in place and allows consistent cuts with a straightedge.
5. Put each moulding in its place
Once the wall frames are in position, use a finish nailer to nail them in. Make sure you use nails that are sufficiently long to penetrate the molding and into the wall studs. However, they should not be too long that it blocks your ability to paint over them.
6. Apply a Finish Coat of Paint or Stain
After installing the molding it is important to give it another coat of paint. This will help prevent wood from splitting, warping, or rotting.
A stain, or paint that matches the walls' colors will also work. It will blend them better. You can also save time and effort by painting the molding.
FAQ
Are there ways to save money on home renovations?
You can save some money by doing as much of the work yourself as possible. Reduce the number and frequency of people you hire for the renovation. Another option is to try to lower the cost of the materials you use in your renovations.
How much does it cost to renovate a house?
Renovations are usually between $5,000 and $50,000. Renovations are typically a major expense for homeowners, with most spending between $10,000 and $20,000
How should home renovations take place?
You must decide where everything will go when you renovate your home. If you are looking to sell your property soon, you need to plan how you will present your home to buyers. The next step is to plan the layout of your living, kitchen, and bathroom. Once you have chosen the rooms you want to remodel, you can start looking for contractors who can help you. Once you have hired a contractor you can begin work on your renovation project.
Can I rent a dumpster?
To help you get rid of the debris from your home remodeling project, you can hire a dumpster. A dumpster can be rented to help keep your yard clean and free of trash.
Should you do floors or walls first?
The best way of starting any project is to determine what you want. It is important to consider how you will use the space, who it will be used for and why. This will help you choose flooring or wallcoverings.
You may want to lay flooring before you create an open-plan kitchen/living space. Wall coverings are an option if you prefer to keep this space private.
Statistics
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
External Links
How To
How do you renovate an old house?
Let's start by deciding what type of renovations you would like to undertake. This could range from simple updates to your kitchen appliances, to completely changing the look of the entire house.
After you've determined the type of renovation you want, you should consider how much money you can spend. You might find that you don't actually have enough funds to cover the full cost of the entire project. This could mean that you have to make tough decisions about which parts of your house you can afford and which you cannot.
If you decide that you're going to go ahead and carry out renovations, then there are several things that you need to consider before starting work. You must ensure you have all the permits needed for the job. You might also need to check whether you need planning permission for certain types or work. If you are planning to make extensions to your house, you may need to apply to the building consent.
Before you start working on the house, it's always best to check the local council website to see if they require any additional permits. Also, check whether you need planning permission for each part of the house that you intend to renovate. If you plan to do major renovations, such as replacing a roof, it is advisable to consult your insurance provider to ensure that you have sufficient coverage.
Next, you will need to decide on the tools and materials that are best suited for your job. There are many different options available, so it's important to take your time to research them thoroughly. Some of the most common items that people use during their renovation projects include paint, wallpaper paste, flooring, tiles, carpets, insulation, fencing, doors, windows, lighting, plumbing, heating systems, electrical wiring, plasterboard, timber, concrete, bricks, tiling, mirrors, sinks, taps, toilets, washing machines, ovens, refrigerators, microwaves, dishwashers, vacuum cleaners, carpet cleaning equipment, air conditioning units, fireplaces, chimneys, and even garden furniture!
You should consider the product's overall quality when shopping for these items. Poor quality products can be expensive and last for a very short time. Good quality products, however, will last longer and provide more value for your money. When you are buying any item, ensure that you only purchase what is necessary for the job. It's important to not buy too much. You could waste valuable resources and end up with a lot of wasted material. Instead, try to purchase exactly what you need.
Once you have chosen the materials, it is time to plan where you will store them while you work on the property. If you're remodeling a large portion of the house, you may need to rent storage space to store your materials until you're ready for them to be returned inside. Another option is to ask friends and family to help you move the items.